Press "Enter" to skip to content

How do you unlock a locked external hard drive?

How to Unlock a Hard Drive

  1. Step 1: Run a disk check. Install the boot disk or USB drive, and power the computer on.
  2. Step 2: Run a system file check. Boot the computer from the disk or USB as you did in step one.
  3. Step 3: Complete a startup repair.
  4. Step 4: Try a system restore.
  5. Step 5: Refresh your PC.

How do I setup my WD Passport?

Open File Explorer. Choose “Computer” from the navigation pane and then double-click on the WD Passport drive (typically labelled “My Passport”). Double-click the WD Apps Setup.exe file to begin configuring the bundled software on your system.

How do I fix my WD Passport not recognized?

If you encounter these issues, take the following solutions to fix it right now.

  1. Solution 1. Plug It into Another USB Port.
  2. Solution 2. Change USB Cable.
  3. Solution 3. Change Drive Letter.
  4. Solution 4. Reinstall USB Controller.
  5. Solution 5. Update WD Device Driver.
  6. Solution 6.
  7. About WD My Passport Ultra.
  8. Bottom Line.

How do I reset my WD Passport hard drive?

Make sure the WD My Passport device has a charge percentage of at least 25% to perform the reset. Now, press and hold the Power button and the WPS button at the same time to reset the drive. Make sure to hold both the buttons exactly for 10 seconds until the drive reboots and then release the buttons.

How do I reset my WD hard drive?

How to Reset a WD Drive

  1. Leave the drive turned on but unplug it from your computer.
  2. Turn around the drive and locate the “Reset” button on the back panel of the unit.
  3. Unbend the leg of a paperclip and insert it into the hole until you depress the reset button and the paperclip won’t go any further.
  4. Warning.

Where is the reset button on WD My Book?

Use a paper clip to press the reset button on the back of the unit in. The reset button is located directly between the power port and the Ethernet data port. Hold the reset button in, and plug the data cable and the power cable back into the unit.

How do I access my book live on my network?

The way forward to access your My Book Live is:

  1. Open your file browser.
  2. In the Network pane under Storage section, you should see your My Book Live device.
  3. RIGHT click that icon, select Open option.
  4. A file browser will appear, you now should have access to your My Book Live storage.

Is wd elements compatible with Windows 10?

Windows 10 doesn’t recognize WD Elements.

How do I use WD Easystore on Windows 10?

Using the USB 3.0 cable, connect the WD Easystore hard drive to your Windows 10 computer. It may take some time for your Windows 10 computer to detect the WD external hard drive. Once your Windows 10 computer detects the drive, the Found New Hardware pop-up dialog will appear on the screen.

How do I install WD Elements on Windows 10?

how do i use a WD Elements with windows 10

  1. Plug the power adapter into a wall outlet.
  2. Connect the power plug into the back of the drive.
  3. Connect the USB or FireWire cable directly into your computer (do not use a USB or FireWire hub).
  4. Connect the other end of the USB or FireWire cable into the external drive.

How do I attach a WD drive to WD Security?

Whenever WD Drive Utilities is started, it says “Attach a supported WD Drive”….

  1. Close WD Security.
  2. Navigate to the Control Panel, Administrative Tools, Services.
  3. Look in the list for a service with the name “WD Drive Manager”, double click the service.

How do I format my WD external hard drive for Windows 10?

If it is larger than 32GB, you can only format it to exFAT.

  1. Open Windows File Explorer, locate and right-click on WD My Passport that you need to format, select “Format”.
  2. Rename the drive, reset its file system to FAT32 or exFAT.
  3. Click “Start” to begin the formatting.